MDF cabinets

The project was carried out in 2005 and refers to construction of several cheap and heavy MDF cabinets with increased resistance, starting from three melamine faced panels of 2600x2000 mm, 18mm thick.

Some Construction Supplies and Hardware Stores offer the option to cut your plywood to the desired dimensions, but they don't make a viable project, so I decided to cut them myself. This way I was able to optimize material consumption and to build much stronger cabinets.

Figure 1
Wall Mount
Cabinet
Figure 2
Wall Mount
Cabinet
Figure 3
Floor Mount
Cabinet
Figure 4
Panel 1
Figure 5
Panel 2
Figure 6
Floor Mount
Cabinet

Disclaimer: The information on this web site is provided "AS IS", without warranty of any kind. The author has made the best efforts to ensure the design and the information provided are reliable. Under no circumstances shall the author be liable for any direct, indirect, incidental, special or consequential loss, damage, expense or injury incurred or suffered which is claimed to resulted from use of this site, even if expressly advised of the possibility of such loss, damage, expense or injury, including, without limitation, any fault, error, omission, interruption or delay with respect thereto.

Links:
[1] - MDF